4
grades of filtration suitable
for each demand of industrial
air:
G, N, F & C
NG Series -
Aluminum Housing with air correction:
1/4" to 3"
BSP or NPT
NF
Series - Carbon steel housings
with flanged air connection:
DN 50 to DN 300
Advantages
of Nucon Micro Filters compared to Conventional
Designs
Greater filter surface
Lower differential pressure
Higher flow rate
Higher dirt holding capacity
Lower specific filter area loading
Insensible to pressure surges
Integrated prefiltration
Fine filteration in 2 stages
Final filteration stage isolates the separated
liquid phases, calms the gas stream
and helps in conjunction with the
foam sock to ensure a continuous
discharge of the liquid
Foam sock free of CFC and Cadmium
Filter elements are manufactured free of
silicon
Can be recycled.
Micro
Filters Element Grades
G Series:
Efficiency 99.99% of all particles
of 3 micron and larger, at 7 bar and
20°C
N Series:
Efficiency 99.99% of all particles
of 1 micron and larger, at 7 bar and
20°C
F Series:
Efficiency 99.9999% of all particles
of 0.01 micron and larger
Oil retention down to 0.01 mg/m3 at
7 bar and 20°C
C Series:
Activated carbon bed which adsorbs
Oil vapour down to <= 0.005 mg/m3
at 7 bar and 20°C
